BRIM STEATITE BOWL INSULATORS 


  BRIM STEATITE HOLLOW BOWL TYPE FEED-THRU INSULATORS

High-strength.  Shoulder at base to center the mounting hole.  For panels, chassis, rack mounting.
White glaze outer surface finish to retard moisture absorbtion & reduce dirt & dust accumulation.
Hardware: Brass Nickel plated rod, nuts, flat washers.   RoHS compliant.


 

 

Brim
No.		   O/A
Height		 Color    A     B Hdwr. Std.
Pkg.
6-95     6" White 2 1/2" 1 9/16"   1/4"    5
6-99  9 1/4" White 4 3/4"  2 5/8"   1/2"    5

 BRIM STEATITE FLANGED BOWL INSULATOR

Steatite for high-strength, and relatively high voltage applications.  White glazed surface finish
to retard moisture absorbtion and reduce dirt and dust accumulation. RoHS compliant.

 

Brim
No.		  O.D.
Base		  Base
Thick.		  Base
  I.D.		 Color Mnting
  Hole		 Std.
Pkg.
6-57 5 3/8"   1/2" 3 1/8" White   9/32"   10

STEATITE INSULATOR PROPERTIES CHART
 
 

Properties  Grade L3  Grade L5
Moisture Absorbtion      0.03%      0.02%
Specific Gravity       2.40       2.62
Max. Oper. Temp.     1000°C     1000°C
Dielectric Strength*   220V/Mil   275V/Mil
Impact Strength 4.5inch-Lb. 4.7inch-Lb.
Compressive Strength  80,000PSI  80,000PSI
Flexural Strength  18,000PSI  21,000PSI
Tensile Strength   8,500PSI  9,000PSI

* @ 60Htz with a 1/4" disk.  


BRIM ELECTRONICS, INC.   120 HOME PLACE          LODI, NJ 07644
TEL: 201-796-2886   FAX: 973-778-2792   E-MAIL:info@brimelectronics.com