BRIMFLEXä 4:1 SHRINKABLE IRRADIATED
      DUAL-WALL POLYOLEFIN: MIL-I-23053/4 


           4:1 SHRINKABLE IRRADIATED POLYOLEFIN TUBING       (NEW)
                      -- DUAL-WALLED -- MIL-I-23053/4

               

SH134 is very flexible yet it provides greater electrical, chemical, and abrasion resistance & greater
mechanical strength than that of shrinkable PVC tubing, plus an inner wall of meltable liner.  With it's
meltable inner/adhesive liner it not only insulates, it can also encapsulate giving a watertight fit.  
Won't crack or peel.  It's non-corrosive, has excellent resistance to soldering irons, oils, solvents, acids,
alkalis, fuels, hydraulic  fluids, and fungus, and it's flame retardant.   Shrink Ratio--4:1 (75%).  Shrinkage
begins when exposed to 120°C.  Longitudinal shrinkage: 10%.   Dielectric Strength: 400V/Mil min. 
Uses: Strain reliefs, jacketing material, component insulation, seal & protect wire splices, breakouts
or connectors-to-cable terminations. OPER. TEMP.: -55°C to +135°C.  
Meets MIL-I-23053/4, Class 3, UL VW-1, CSA OFT (jacket only), ASTM D638.

Brimflexä
No.
Min. Exp.
    I.D.
Rec. I.D.
   Max.
Rec. I.D.
   M.M.
Thick.
 Wall*
Thick.
Wall**
 Std.
 P-U
SH134-3/16"     .158"    .039"      1.0  .035"   .020" 100'
SH134-5/16"     .315"    .079"      2.0  .035"   .020" 100'
SH134-1/2"     .472"    .118"      3.0  .051"   .024" 100'
SH134-3/4"     .630"    .157"      4.0  .063"   .030" 100'
SH134-1"     .945"    .236"      5.0  .083"   .031" 100'
SH134-1 1/4"   1.260"    .315"      6.0  .091"   .041" 100'

STD. COLOR: Black     STD. P-U: 4ft. lengths.
*Total wall thickness including liner, if full recovery allowed.
**Total wall thickness of liner only, if full recovery allowed.
++O.D. of closest equivalent wire.



BRIM ELECTRONICS, INC. 120 HOME PLACE    LODI, NJ 07644
TEL: 201-796-2886     FAX: 973-778-2792     E-MAIL: info@brimelectronics.com