BRIFLON HEAT SHRINKABLE PTFE & FEP TUBINGS
 


SH200, SH250, SH254 & SHTF tubings have excellent resistance to weathering, chemicals (oils, fuels,
solvents, acids, alkalis, fluids), and fungus, are non-corrosive, low water absorption (.01%), will not
burn nor support combustion, have high dielectric strength (850V/MIL dry), low dielectric constant, &
a very low coefficient of friction.  High mechanical strength yet flexible (low temperature flexibility
-67°C).  Color: Natural (FEP-transparent; PTFE-translucent).  Their excellent electrical characteristics
remain stable throughout their electrical range.  Longitudinal change with full shrinkage: FEP - 15%,
PTFE — 20%.  



SHTF SHRINKABLE PTFE/FEP

SHTF is made with a combination of PTFE and FEP resins.  The inner wall is made of FEP & the
outer
wall of PTFE.  When the tubing is heated, the PTFE begins to shrink down tightly over the FEP. 
The FEP inner wall melts and flows -squeezes-
into & around the item covered, creating a solid or
near solid encapsulation.  The fit is so tight that it is safe against most environmental hazards
involving pull or vibrations.  It can be used as a strain relief, or moisture-proof covering for wires,
connectors, terminals, splices,  electronic  devices, etc.   SHTF is non-flammable, non-corrosive, &
offers all of the other outstanding electrical chemical, and mechanical properties of PTFE. 
Oper. Temp.: -85°F to +450°F.
 

Briflon™
No.

Min. Exp.
     I.D.

Max. Rec.
     I.D.

Dimen.
 **Wall

 

Briflon™
 No.

Min. Exp.
     I.D.

Max. Rec.
     I.D.

Dimen.
 **Wall

SHTF-1 

   .065"

   .000"**

  .015"

 

SHTF-6

    .240"

    .150"

  .020"

SHTF-2 

   .115"

   .045"

  .015"

 

SHTF-7

    .350"

    .210"

  .025"

SHTF-3 

   .130"

   .060"

  .015"

 

SHTF-8

    .480"

    .315"

  .032"

SHTF-4 

   .180"

   .065"

  .015"

 

SHTF-9

    .700"

    .440"

  .040"

SHTF-5

   .190"

   .070"

  .015"

 

SHTF-10

  1.000"

    .700"

  .045"

STD. P-U: 100ft.  (In random lengths of 1Ft. to 3 Ft.) ** Fully closes off.   
RoHS compliant.


SH200 (SHRINKABLE FEP) 1.3:1    MIL-I-23053/11    200°C

SH200: an extruded modified shrinkable FEP (Fluorinated-Ethylene-Propylene) tubing, with a continuous
Oper. Temp. of +205°C (400°F). SH200 completely shrinks at 384°F (partial shrinkage possible at 300°F).
Shrinkage ratio -- 1.3:1.  It melts at 525-563°F so it can be used to encapsulate.  Now many sensitive
components, parts, devices, etc. can be protected with this tubing made from FEP resin.   Fills the void
between the high temperature of PTFE, and the low temperature of shrinkable PVC and Polyolefin tubings.

 STD. P-U: 100', 4ft. min. lengths.     

Briflon™
No.

 Min.
 Exp.
  I.D.

Max.
Rec.
 I.D.

Dimen.
 **Wall

±Wall
Toler.

 

Briflon™
No.

 Min.
 Exp.
  I.D.

 Max.
 Rec.
  I.D.

Dimen.
 **Wall

±Wall
Toler.

SH200-24

.031"

.027"

  .008"

  .002"

 

SH200-3

  .310"

  .249"

  .011"

  .004"

SH200-22

.036"

.032"

  .008"

  .002"

 

SH200-2

  .365"

  .280"

  .012"

  .004"

SH200-20

.045"

.039"

  .008"

  .002"

 

SH200-1

  .400"

  .311"

  .012"

  .004"

SH200-18

.060"

.049"

  .008"

  .002"

 

SH200-0

  .440"

  .349"

  .012"

  .004"

SH200-16

.075"

.061"

  .009"

  .002"

 

SH200-3/8"

  .500"

  .383"

  .015"

  .004"

SH200-14

.092"

.072"

  .009"

  .002"

 

SH200-7/16"

  .580"

  .448"

  .020"

  .004"

SH200-12

.115"

.089"

  .009"

  .002"

 

SH200-1/2" 

  .666"

  .510"

  .020"

  .004"

SH200-10

.141"

.114"

  .010"

  .003"

 

SH200-5/8"

  .830"

  .637"

  .025"

  .004"

SH200-9

.158"

.124"

  .010"

  .003"

 

SH200-3/4"

1.000"

  .764"

  .030"

  .004"

SH200-8 

.180"

.143"

  .010"

  .003"

 

SH200-7/8"

1.170"

  .891"

  .035"

  .004"

SH200-7 

.197"

.158"

  .011"

  .004"

 

SH200-1"

1.330"

1.020"

  .035"

  .004"

SH200-6

.225"

.180"

  .011"

  .004"

 

SH200-1 1/4"

1.660"

1.270"

  .035"

  .004"

SH200-5

.248"

.198"

  .011"

  .004"

 

SH200-1 1/2"

2.000"

1.520"

  .035"

  .004"

SH200-4

.290"

.226"

  .011"

  .004"

 

 

 

 

 

 

** All dimensions are based on full recovery.         RoHS compliant.                                 


SH206 (SHRINKABLE FEP) 1.6:1    MIL-I-23053/11    200°C

SH206 tubings are manufactured from extruded modified FEP (Fluorinated-Ethylene-Propylene)
resin, with a
continuous Oper. Temp. of +205°C (400°F).   SH206 can completely shrink at 384°F
with partial
shrinkage as low as 350°F.  Shrinkage ratio -- 1.6:1.  Suitable for those applications
where 1.6:1
shrink capabilities are required and standard 1.3:1 shrink FEP is not sufficient.  It melts
at 525-563°F
so it can be used to encapsulate.  Now many sensitive components, parts, devices, etc.
can be
protected with FEP, which fills void between the high temperature of PTFE, and the low
temperature
of shrinkable PVC and Polyolefin tubings.   Mfg. per MIL-I-23053/11 Cl.2.
STD. COLOR: Natural (Transparent).
 
 

Briflon™
No.

 Min.
 Exp.
  I.D.

Max.
Rec.
 I.D.

Dimen.
 **Wall

±Wall
Toler.

STD.
P-U*

 

Briflon™
No.

  Min.
  Exp.
   I.D.

 Max.
 Rec.
  I.D.

Dimen.
 **Wall

±Wall
Toler.

STD.
P-U*

SH206-3/32"

.093"

.056"

  .008"

 .003"

 100'

 

SH206-1/2" 

  .500"

  .300"

  .015"

 .004"

 100'

SH206-1/8" 

.125"

.075"

  .010"

 .003"

 100'

 

SH206-3/4" 

  .750"

  .450"

  .020"

 .004"

 100'

SH206-3/16"

.188"

.115"

  .010"

 .003"

 100'

 

SH206-1" 

1.000"

  .600"

  .025"

 .005"

   50'

SH206-1/4" 

.250"

.150"

  .010"

 .003"

 100'

 

SH206-1 1/2"

1.500"

  .900"

  .030"

 .005"

   50'

SH206-3/8" 

.375"

.225"

  .012"

 .003"

 100'

 

SH206-2" 

2.000"

1.200"

  .030"

 .005"

   50'

*4ft. min. lengths.     RoHS compliant.
OTHER SIZES AND COLORS AVAILABLE TO ORDER 

ETCHING FOR BONDING IS AVAILABLE TO ORDER. 



 SH250 (SHRINKABLE PTFE) 1.5:1    MIL-I-23053/12    250°C

SH250: an extruded shrinkable modified PTFE (PolyTetraFluoroEthylene) resin tubing, with a
continuous operating temperature of +250°C (550°F).  SH250 will shrink when heated to 621°F. 
Shrinkage ratio — 1.5:1.  Used
wherever hi-temperature protection required. Applications:
Protective covers in corrosive environments, protection for electronic components, cable
jacketing covers on immersion heaters, heat exchangers,
light duty bearing surfaces, roll covers. 
MIL-I-23053/12 Class 2** or Class 3, MIL-DTL-23053/12, AMS-DTL-23053/12.

STD.P-U: 100', Sizes 30-14: 3ft. min., 13-1" 1ft. min. lengths.

   

Briflon™
No.

 Min.
 Exp.
  I.D.

Max.
Rec.
 I.D.

Dimen.
 **Wall

±Wall
Toler.

 

Briflon™
No.

 Min.
 Exp.
 I.D.

 Max.
 Rec.
  I.D.

Dimen.
 **Wall

±Wall
Toler.

SH250-30

.034"

.015"

  .009"

  .002"

 

SH250-9

  .205"

  .124"

  .015"

  .004"

SH250-28

.038"

.018"

  .009"

  .002"

 

SH250-8

  .240"

  .141"

  .015"

  .004"

SH250-26

.046"

.022"

  .010"

  .002"

 

SH250-7

  .270"

  .158"

  .015"

  .004"

SH250-24

.050"

.027"

  .010"

  .002"

 

SH250-6

  .302"

  .178"

  .015"

  .004"

SH250-22

.055"

.032"

  .012"

  .003"

 

SH250-5

  .320"

  .198"

  .015"

  .004"

SH250-20

.060"

.039"

  .012"

  .003"

 

SH250-4

  .370"

  .224"

  .015"

  .004"

SH250-19

.065"

.043"

  .012"

  .003"

 

SH250-3

  .390"

  .249"

  .015"

  .004"

SH250-18

.076"

.049"

  .012"

  .003"

 

SH250-2

  .430"

  .278"

  .015"

  .004"

SH250-17

.085"

.054"

  .012"

  .003"

 

SH250-1

  .450"

  .311"

  .015"

  .004"

SH250-16

.093"

.061"

  .012"

  .003"

 

SH250-0

  .470"

  .347"

  .015"

  .004"

SH250-15

.110"

.067"

  .012"

  .003"

 

SH250-3/8"**

  .560"

  .399"

  .025"

  .006"

SH250-14

.120"

.072"

  .012"

  .003"

 

SH250-1/2"**

  .750"

  .524"

  .025"

  .006"

SH250-13

.140"

.080"

  .012"

  .003"

 

SH250-5/8"**

  .930"

  .655"

  .030"

  .006"

SH250-12

.150"

.089"

  .012"

  .003"

 

SH250-3/4"**

1.125"

  .786"

  .035"

  .008"

SH250-11

.170"

.101"

  .012"

  .003"

 

SH250-1"**

1.500"

1.036"

  .035"

  .008"

SH250-10

.191"

.112"

  .012"

  .003"

 

 

 

 

 

 

**BASED ON FULL RECOVERY.    ETCHING FOR BONDING IS AVAILABLE TO ORDER.
RoHS compliant.


 SH254 4:1 (SHRINKABLE PTFE)    MIL-I-23053/12     250°C

SH254 tubing can recover to approximately 1/4 of its expanded size when heated to its gel point
(621°F-625°F).   Because of its exceptional shrinkage capability, its recommended that the outside
diameter of the object to be shrunk upon down should not be more than 50% of the expanded I.D.
of the size of the tubing used.  Many sizes conform to AMS 3584 and MIL-I-23053/12 Cl.5,
MIL-DTL-23053/12, AMS-DTL-23053/12.  SH254 is
non-flamable, non-corrosive, and offers all of the other
outstanding electrical, chemical, and
mechanical properties of Teflon*. Std. Color: Natural (Clear) .
    

Briflon™
No.

 Min.
 Exp.
  I.D.

 Min.
 Exp.
  I.D.

Dimen.
 **Wall

±Wall
Toler.

Class

 

Briflon™
No.

  Min.
  Exp.
  I.D.

 Min.
 Exp.
  I.D.

Dimen.
 **Wall

±Wall
Toler.

Class

SH254-5/64"+

.078"

.025"

  .009"

 .002"

 501

 

SH254-9/16"

  .562"

.155"

  .015"

 .004"

 509

SH254-1/8"+

.125"

.037"

  .010"

 .002"

 502

 

SH254-5/8"+

  .625"

.178"

  .015"

 .004"

 510

SH254-3/16" 

.187"

.050"

  .012"

 .003"

 503

 

SH254-11/16"

  .687"

.198"

  .015"

 .004"

 511

SH254-1/4"+ 

.250"

.063"

  .012"

 .003"

 504

 

SH254-3/4"+

  .750"

.224"

  .015"

 .004"

 512

SH254-5/16" 

.312"

.079"

  .012"

 .003"

 505

 

SH254-7/8" 

  .875"

.244"

  .015"

 .004"

 513

SH254-3/8"+ 

.375"

.096"

  .012"

 .003"

 506

 

SH254-1"+

1.000"

.278"

  .015"

 .004"

 514

SH254-7/16" 

.438"

.112"

  .012"

 .003"

 507

 

SH254-1 1/4"+

1.250"

.347"

  .015"

 .004"

 515

SH254-1/2"+ 

.500"

.144"

  .015"

 .004"

 508

 

SH254-1 1/2"

1.500"

.400"

  .015"

 .004"

 516

STD. P-U: 100', in 4 ft. min. lengths.  **Based on full recovery.   +Per MIL-I-23053/12A Class 5, MIL-DTL-23053/12, AMS-DTL-23053/12.
RoHS compliant.
OTHER SIZES & COLORS IN PTFE AND FEP ARE AVAILABLE TO ORDER.
ETCHING FOR BONDING IS AVAILABLE TO ORDER.  
             



BRIM ELECTRONICS, INC. 120 HOME PLACE    LODI, NJ 07644
TEL: 201-796-2886     FAX: 973-778-2792     E-MAIL: info@brimelectronics.com